How To Clean An Old Wooden Ladder

Overview

If you lot've got one-time wooden furniture that's seen better days, you lot'd be surprised how like shooting fish in a barrel it is to restore it and requite it a new charter of life. Whether information technology's from coffee and vino stains, scratches and gouges or peeling varnish, we'll evidence you the steps to bring that piece of wooden furniture back to looking like information technology's brand new.

Tools and materials

Steps

1 Clean the table

Use a damp cloth to thoroughly make clean the table surface and remove any dirt or grime. Doing this before you sand will give you a smoother finish.

2 Sand the table

To get rid of the varnish on the table, use a fibroid sandpaper similar twoscore grit with an orbital sander. Sand the top and sides of the table. Make sure you regularly check the grit on the sandpaper and replace it when information technology's worn. When you're sanding, don't forget your safety equipment and put drop sheets on the floor.

3 Castor the grit off

Every bit you sand, regularly castor the dust off the table. This is so you tin see how much more sanding you lot need to exercise on the surface.

Bunnings Team Member brushing the dust from the table

4 Continue sanding

Continue sanding with the coarse grit sandpaper to strip the table back to its bare wood. Make sure y'all continue to cheque the grit on the sandpaper and replace information technology when necessary.

Bunnings Team Member continuing to sand the table

five Utilize a finer grit sandpaper

In one case you've stripped the table back to blank forest, modify the sandpaper to a effectively grit, such as 240 dust. This volition help y'all sand the table back until it's smoothen. Remember to always sand with the grain and brush the dust off the tabular array.

Bunnings Team Member use fine grit sandpaper on the table

vi Wipe the table with turps

Wipe the table with mineral turpentine to remove whatever fine grit and residue that might still be on the tabular array. When using turpentine put on your dust mask.

Bunnings Team Member wiping the table with turps

7 Apply the kickoff coat of varnish

After the table is dry out, it's fourth dimension to apply the first coat of varnish. Stir the varnish thoroughly to get rid of any lumps. With a little varnish on your brush, apply information technology to the table, going with the grain. Go on an eye out for runs when you lot're working around an edge or into a join. Smooth any runs out with the brush equally they occur. Let the get-go glaze dry thoroughly.

Bunnings Team Member applying varnish to the table

8 Lightly sand the table

Once the first glaze of varnish has dried, give it a light sand with a fine sanding cake. This will give y'all a smoothen sleeky finish. Wipe away whatever dust.